VALENTINE Direct Hard Wire Cord with FLAT MUTE Button Kit
Quantities are limited. No one else has
these, be the first!
Email us if you
need help installing these high quality cords
We provide a 1 year warranty with all of our direct cords!
New with Detailed instructions and wire ties to make your installation
neat.
Missing a power cord for your Radar Detector?
Get one here!
What is a Direct Wire Cord with Flat MUTE Button Kit?
The Direct Wire Cord is an optional accessory
that allows you to connect the Valentine V 1.7 or V 1.8 Radar Detector directly
to your fuse block or other 12-volt source
(leaving your lighter socket free for other uses)
and provides a Flat MUTE button for the detector. You could use the button
to change the Mode setting on your detector also.
The Direct Cord with Flat MUTE button is
approximately 8 feet long, with the MUTE button on a cord that's about 4 feet
long and connected at the power connection end of the cord so you can place it
within arms reach.
Normally comes
with a T - Tap
to connect to a power wire source like below.
If you need a Fuse tap, just let us know which one you
would like and we'll replace the T-Tap in your order.
1. Blade
Fuse Tap
to connect to a blade fuse
or a
2. Mini Blade Fuse Tap
to connect to a mini blade
Now you can wire directly to your fuse box or
power wire source and eliminate dangling power cords.
Our power cords will allow your radar detector to be hard
wired to your vehicle very easily. If you do change vehicles, simply unplug the
red wire from the T-tap connector or Fuse Tap, and unhook the black ground
wire.
This kit will
work on the below detectors that uses the "Modular" type power plug.
Valentine
models:
All Valentine V1 Models
What's included?
New Valentine V1 Direct Cord with Flat Mute
Button and built-in
FUSE kit
Detailed instructions to make your
installation a breeze
Wire ties to make your installation neat
Normally comes
with a T - Tap
to connect to a power wire source.
If you need a Fuse tap, just let us know which one you
would like and we'll replace the T-Tap in your order.
1. Blade
Fuse Tap
or a
2. Mini
Blade Fuse Tap
to connect to fuse in the fuse box very easily.
1 year limited warranty at no charge.
Delivery Confirmation to track your order.
(available in most cases)
to connect to a power wire source like below.
to connect to a blade fuse
or a
to connect to a mini blade
